Audio Technica AT-LPW30TK

Fully Manual Belt-Drive Turntable
 
The AT-LPW30TK is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The two-speed (33-1/3 and 45 RPM) turntable features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated teak veneer to limit low-frequency acoustical feedback.
The turntable includes a straight aluminum tonearm with adjustable tracking force and an AT-HS4 universal ½”-mount headshell with an AT-VM95C Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95C cartridge, which comes with a 0.6 mil conical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.The AT-LPW30TK is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.
Optimal High-Fidelity Audio Reproduction
Stylish Wood Turntable
A stunning addition to any system, the AT-LPW30TK features an anti-resonance plinth with simulated teak wood veneer to limit low-frequency acoustic feedback.
 
Sophisticated Styling
Audio Aesthetics
The LPW30TK was designed to give you optimal high-fidelity audio reproduction from vinyl, with sophisticated styling.
 
Cartridge Assembly Line Circa 1962
Over 55 Years of Analog Excellence
We got our start in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century’s worth of analog expertise goes into every turntable we produce, ensuring you get the best listening experience from your vinyl.
 
Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
Fully manual operation
Adjustable dynamic anti-skate control
Professional anti-resonance, die-cast aluminum platter with rubber mat
AT-HS4 universal ½”-mount headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus
AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
Straight tonearm with hydraulically damped lift control and lockable rest
Anti-resonance MDF (medium density fiberboard) plinth with teak simulated wood veneer
Built-in switchable phono pre-amplifier for phono or line-level output
AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover
Turntable
Type
Belt-drive manual turntable
Motor
DC servo
Drive Method
Belt drive
Speeds
33-1/3 RPM, 45 RPM
Turntable Platter
Die-cast aluminum
Wow and Flutter
60dB
Output Level
Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/secPre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain
35 dB nominal, RIAA equalized
Power Supply Requirements
100-240V AC, 50/60 Hz, 0.5 A Max.
Dimensions
420.0 mm (16.53″) W x 340.0 mm (13.38″) D x 116.9 mm (4.6″) H
Weight
3.90 kg (8.60 lbs.) without dust cover
Accessories Included
Dust cover, Platter, Turntable mat, Drive belt, Counterweight, AT-HS4 headshell, AT-VM95C stereo cartridge, 45-RPM adapter, RCA audio cable (approx.. 1.0 m (3.3′)), AC adapter (approx. 1.5 m (4.9′)) (AD-SA1205WE), Dust cover hinges
Notes
Tonearm type: Static balanced straight aluminum pipe tonearmEffective arm length: 223.6 mmOverhang: 18.6 mmTracking error angle: <2 degreesApplicable cartridge weight: 12-17 gStylus pressure adjustment range: 0-3 gAC adapter: 12 V, 0.5 AReplacement Stylus: AT-VMN95C